Mobilmod® 100 Frame | Mobile Scaffold

Mobilmod® 100 | Frame
Mobile Scaffolding Systems

 

PLATFORM HEIGTS 

Closed Areas Outdoors
1 m 1 m
1,5 m 1,5 m
2 m 2 m
2,5 m 2,5 m
3 m 3 m
4 m 4 m
4,5 m 4,5 m
5 m x
6 m x
6,5 m x

1. MOBILMOD® 100
Working Area (W1xL) : 1026 mm x 2500 mm 
Base Area (W2xL) : 1350 mm x 2500 mm (Without support arm)
Base Area (W3xL) : 3350 mm x 2500 mm (With Support Arm)
 
  
 
2. MATERIAL SPECIFICATIONS

- Industrial pipes and profiles manufactured from S235JR structural steel (Min. Yield Strength =235 MPa) in accordance with DIN 2394, TS EN 10305-3, TS EN 10219-1/2 norms have been used in all scaffolding elements.

- Frame posts in the system are manufactured from steel industrial pipes in Ø48, 3x3 mm, horizontal elements in Ø34x2 mm, diagonal elements in Ø42,4x2,5 mm (Ø34x2 mm for Mobilmod 2001) cross-sections and steel platforms are manufactured from steel metal sheet with special shape in t=1.5 mm wall thickness.

- Welded joints shall be performed by certified welders qualified by the standard of EN 9606-1 within the scope of the standard of TS EN ISO 3834-3 "QUALITY REQUIREMENTS FOR METALLIC MATERIALS MELTING WELDING" with gas metal arc welding method.

- The scaffold elements have been coated with "hot dipping galvanized" method complying with the standard of TS EN ISO 1461 against corrosion.

- The clamps with forged steel complying with EN 74-1 are used in the scaffolds.

- Should the scaffolds are used other than standard configurations approved by TSE, durability and robustness calculations and static calculations should be conducted or caused to be conducted in accordance with selected installation and use at all times.

- Periodic inspection and maintenance of scaffolds should be performed once 6 months.

 

 3. LOAD CLASS

- Mobilmod Scaffolding System has been designed and manufactured according to Load Class 3 provided in TS EN 12811-1 standard, Schedule 3.

- Service load is accepted as 2 kN/m2 (200 kg/m2) on the working area. Load more than 200 kg/m2 may not be applied on scaffold platforms.

- In addition to this, no single load may be applied more than 150 kg on an area with measurements smaller more than 50cmx50cm, and

- No single load may be applied more than 100 kg on an area with measurements smaller more than 20cmx20 cm.

- That the loads transferred to the system from the platforms can be carried safely by other elements should be verified by performing static calculation based on the configuration used.

When single loads according to load class 3 to the steel apply uniformly distributed load and partial area load in the most ineligible location, maximum deflection amount performed by the platforms remains within the desired limits requested by the standard.

 

Mobile scaffolding, also known as wheeled scaffolding systems and aluminum scaffolding are used indoors as an assembly scaffold.

System Components Mobilmod Scaffolding System Module

1 - Steel T-Profile Base1350 (1700) 
2 - T–Base Interconnection 2400 
3 - Steel Frame 1350x2000 
4 - Steel Frame 1350x1000 
5 - Steel Horizontal  - 2500 
6 - Steel Diagonal 3200 (H:200 L:250) 
7 - Steel Diagonal 2692 (H:100 L:250) 
8 - Steel Platform with Stairs - 640x2500 
9 - Steel Platform - 320*2500 
10 - Steel Toe Board - 150*2500 
11 - Steel Toe Board  - 150*2500 
12 - Toe Board Base 1350 
13 - Stair Base Support
14 - Steel Support Arm 1820 
15 - Wheel [4102-PUR-150 F09]
Yapeksan 2016 © All Right Reserved
YAPEKSAN
Yapeksan İskele Kalıp Sistemleri

Mobilmod® 100 Frame | Mobile Scaffold

Mobilmod® 100 | Frame
Mobile Scaffolding Systems

 

PLATFORM HEIGTS 

Closed Areas Outdoors
1 m 1 m
1,5 m 1,5 m
2 m 2 m
2,5 m 2,5 m
3 m 3 m
4 m 4 m
4,5 m 4,5 m
5 m x
6 m x
6,5 m x

1. MOBILMOD® 100
Working Area (W1xL) : 1026 mm x 2500 mm 
Base Area (W2xL) : 1350 mm x 2500 mm (Without support arm)
Base Area (W3xL) : 3350 mm x 2500 mm (With Support Arm)
 
  
 
2. MATERIAL SPECIFICATIONS

- Industrial pipes and profiles manufactured from S235JR structural steel (Min. Yield Strength =235 MPa) in accordance with DIN 2394, TS EN 10305-3, TS EN 10219-1/2 norms have been used in all scaffolding elements.

- Frame posts in the system are manufactured from steel industrial pipes in Ø48, 3x3 mm, horizontal elements in Ø34x2 mm, diagonal elements in Ø42,4x2,5 mm (Ø34x2 mm for Mobilmod 2001) cross-sections and steel platforms are manufactured from steel metal sheet with special shape in t=1.5 mm wall thickness.

- Welded joints shall be performed by certified welders qualified by the standard of EN 9606-1 within the scope of the standard of TS EN ISO 3834-3 "QUALITY REQUIREMENTS FOR METALLIC MATERIALS MELTING WELDING" with gas metal arc welding method.

- The scaffold elements have been coated with "hot dipping galvanized" method complying with the standard of TS EN ISO 1461 against corrosion.

- The clamps with forged steel complying with EN 74-1 are used in the scaffolds.

- Should the scaffolds are used other than standard configurations approved by TSE, durability and robustness calculations and static calculations should be conducted or caused to be conducted in accordance with selected installation and use at all times.

- Periodic inspection and maintenance of scaffolds should be performed once 6 months.

 

 3. LOAD CLASS

- Mobilmod Scaffolding System has been designed and manufactured according to Load Class 3 provided in TS EN 12811-1 standard, Schedule 3.

- Service load is accepted as 2 kN/m2 (200 kg/m2) on the working area. Load more than 200 kg/m2 may not be applied on scaffold platforms.

- In addition to this, no single load may be applied more than 150 kg on an area with measurements smaller more than 50cmx50cm, and

- No single load may be applied more than 100 kg on an area with measurements smaller more than 20cmx20 cm.

- That the loads transferred to the system from the platforms can be carried safely by other elements should be verified by performing static calculation based on the configuration used.

When single loads according to load class 3 to the steel apply uniformly distributed load and partial area load in the most ineligible location, maximum deflection amount performed by the platforms remains within the desired limits requested by the standard.

 

Mobile scaffolding, also known as wheeled scaffolding systems and aluminum scaffolding are used indoors as an assembly scaffold.

Mobilmod Scaffolding System Module

1 - Steel T-Profile Base1350 (1700) 
2 - T–Base Interconnection 2400 
3 - Steel Frame 1350x2000 
4 - Steel Frame 1350x1000 
5 - Steel Horizontal  - 2500 
6 - Steel Diagonal 3200 (H:200 L:250) 
7 - Steel Diagonal 2692 (H:100 L:250) 
8 - Steel Platform with Stairs - 640x2500 
9 - Steel Platform - 320*2500 
10 - Steel Toe Board - 150*2500 
11 - Steel Toe Board  - 150*2500 
12 - Toe Board Base 1350 
13 - Stair Base Support
14 - Steel Support Arm 1820 
15 - Wheel [4102-PUR-150 F09]
YAPEKSAN
Yapeksan 2016 © All Right Reserved

Yapeksan İskele Kalıp Sistemleri

Mobilmod® 100 Frame | Mobile Scaffold

Mobilmod® 100 | Frame
Mobile Scaffolding Systems

 

PLATFORM HEIGTS 

Closed Areas Outdoors
1 m 1 m
1,5 m 1,5 m
2 m 2 m
2,5 m 2,5 m
3 m 3 m
4 m 4 m
4,5 m 4,5 m
5 m x
6 m x
6,5 m x

1. MOBILMOD® 100
Working Area (W1xL) : 1026 mm x 2500 mm 
Base Area (W2xL) : 1350 mm x 2500 mm (Without support arm)
Base Area (W3xL) : 3350 mm x 2500 mm (With Support Arm)
 
  
 
2. MATERIAL SPECIFICATIONS

- Industrial pipes and profiles manufactured from S235JR structural steel (Min. Yield Strength =235 MPa) in accordance with DIN 2394, TS EN 10305-3, TS EN 10219-1/2 norms have been used in all scaffolding elements.

- Frame posts in the system are manufactured from steel industrial pipes in Ø48, 3x3 mm, horizontal elements in Ø34x2 mm, diagonal elements in Ø42,4x2,5 mm (Ø34x2 mm for Mobilmod 2001) cross-sections and steel platforms are manufactured from steel metal sheet with special shape in t=1.5 mm wall thickness.

- Welded joints shall be performed by certified welders qualified by the standard of EN 9606-1 within the scope of the standard of TS EN ISO 3834-3 "QUALITY REQUIREMENTS FOR METALLIC MATERIALS MELTING WELDING" with gas metal arc welding method.

- The scaffold elements have been coated with "hot dipping galvanized" method complying with the standard of TS EN ISO 1461 against corrosion.

- The clamps with forged steel complying with EN 74-1 are used in the scaffolds.

- Should the scaffolds are used other than standard configurations approved by TSE, durability and robustness calculations and static calculations should be conducted or caused to be conducted in accordance with selected installation and use at all times.

- Periodic inspection and maintenance of scaffolds should be performed once 6 months.

 

 3. LOAD CLASS

- Mobilmod Scaffolding System has been designed and manufactured according to Load Class 3 provided in TS EN 12811-1 standard, Schedule 3.

- Service load is accepted as 2 kN/m2 (200 kg/m2) on the working area. Load more than 200 kg/m2 may not be applied on scaffold platforms.

- In addition to this, no single load may be applied more than 150 kg on an area with measurements smaller more than 50cmx50cm, and

- No single load may be applied more than 100 kg on an area with measurements smaller more than 20cmx20 cm.

- That the loads transferred to the system from the platforms can be carried safely by other elements should be verified by performing static calculation based on the configuration used.

When single loads according to load class 3 to the steel apply uniformly distributed load and partial area load in the most ineligible location, maximum deflection amount performed by the platforms remains within the desired limits requested by the standard.

 

Mobile scaffolding, also known as wheeled scaffolding systems and aluminum scaffolding are used indoors as an assembly scaffold.

Mobilmod Scaffolding System Module

1 - Steel T-Profile Base1350 (1700) 
2 - T–Base Interconnection 2400 
3 - Steel Frame 1350x2000 
4 - Steel Frame 1350x1000 
5 - Steel Horizontal  - 2500 
6 - Steel Diagonal 3200 (H:200 L:250) 
7 - Steel Diagonal 2692 (H:100 L:250) 
8 - Steel Platform with Stairs - 640x2500 
9 - Steel Platform - 320*2500 
10 - Steel Toe Board - 150*2500 
11 - Steel Toe Board  - 150*2500 
12 - Toe Board Base 1350 
13 - Stair Base Support
14 - Steel Support Arm 1820 
15 - Wheel [4102-PUR-150 F09]
YAPEKSAN
Yapeksan 2016 © All Right Reserved
Yapeksan İskele Kalıp Sistemleri

Mobilmod® 100 Frame | Mobile Scaffold

Mobilmod® 100 | Frame
Mobile Scaffolding Systems

 

PLATFORM HEIGTS 

Closed Areas Outdoors
1 m 1 m
1,5 m 1,5 m
2 m 2 m
2,5 m 2,5 m
3 m 3 m
4 m 4 m
4,5 m 4,5 m
5 m x
6 m x
6,5 m x

1. MOBILMOD® 100
Working Area (W1xL) : 1026 mm x 2500 mm 
Base Area (W2xL) : 1350 mm x 2500 mm (Without support arm)
Base Area (W3xL) : 3350 mm x 2500 mm (With Support Arm)
 
  
 
2. MATERIAL SPECIFICATIONS

- Industrial pipes and profiles manufactured from S235JR structural steel (Min. Yield Strength =235 MPa) in accordance with DIN 2394, TS EN 10305-3, TS EN 10219-1/2 norms have been used in all scaffolding elements.

- Frame posts in the system are manufactured from steel industrial pipes in Ø48, 3x3 mm, horizontal elements in Ø34x2 mm, diagonal elements in Ø42,4x2,5 mm (Ø34x2 mm for Mobilmod 2001) cross-sections and steel platforms are manufactured from steel metal sheet with special shape in t=1.5 mm wall thickness.

- Welded joints shall be performed by certified welders qualified by the standard of EN 9606-1 within the scope of the standard of TS EN ISO 3834-3 "QUALITY REQUIREMENTS FOR METALLIC MATERIALS MELTING WELDING" with gas metal arc welding method.

- The scaffold elements have been coated with "hot dipping galvanized" method complying with the standard of TS EN ISO 1461 against corrosion.

- The clamps with forged steel complying with EN 74-1 are used in the scaffolds.

- Should the scaffolds are used other than standard configurations approved by TSE, durability and robustness calculations and static calculations should be conducted or caused to be conducted in accordance with selected installation and use at all times.

- Periodic inspection and maintenance of scaffolds should be performed once 6 months.

 

 3. LOAD CLASS

- Mobilmod Scaffolding System has been designed and manufactured according to Load Class 3 provided in TS EN 12811-1 standard, Schedule 3.

- Service load is accepted as 2 kN/m2 (200 kg/m2) on the working area. Load more than 200 kg/m2 may not be applied on scaffold platforms.

- In addition to this, no single load may be applied more than 150 kg on an area with measurements smaller more than 50cmx50cm, and

- No single load may be applied more than 100 kg on an area with measurements smaller more than 20cmx20 cm.

- That the loads transferred to the system from the platforms can be carried safely by other elements should be verified by performing static calculation based on the configuration used.

When single loads according to load class 3 to the steel apply uniformly distributed load and partial area load in the most ineligible location, maximum deflection amount performed by the platforms remains within the desired limits requested by the standard.

 

Mobile scaffolding, also known as wheeled scaffolding systems and aluminum scaffolding are used indoors as an assembly scaffold.

Mobilmod Scaffolding System Module

1 - Steel T-Profile Base1350 (1700) 
2 - T–Base Interconnection 2400 
3 - Steel Frame 1350x2000 
4 - Steel Frame 1350x1000 
5 - Steel Horizontal  - 2500 
6 - Steel Diagonal 3200 (H:200 L:250) 
7 - Steel Diagonal 2692 (H:100 L:250) 
8 - Steel Platform with Stairs - 640x2500 
9 - Steel Platform - 320*2500 
10 - Steel Toe Board - 150*2500 
11 - Steel Toe Board  - 150*2500 
12 - Toe Board Base 1350 
13 - Stair Base Support
14 - Steel Support Arm 1820 
15 - Wheel [4102-PUR-150 F09]
YAPEKSAN
Yapeksan 2016 © All Right Reserved